Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Inspect the components (i.e., heat shields, hangers, etc.). Are any components loose? | -- | ||
2 |
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems. Tighten all of the loose fasteners to specifications. Is the exhaust system vibrating or producing a rattling noise? | -- | System OK | |
3 | Check the components for misalignment. Are any components misaligned? | -- | -- | |
4 |
Is the exhaust system vibrating or producing a rattling noise? | -- | -- | System OK |
