Door Lock and Side Window and Outside Rearview Mirror Remote Control Switch Replacement for Cadillac DeVille 1998
Door Lock and Side Window and Outside Rearview Mirror Remote Control Switch Replacement Eldorado
Removal Procedure
- Apply protective tape to the front of the switch and door panel
in order to protect the surfaces.
- Use a wide, flat-bladed
tool in order to pry up on the rear edge of the trim plate.
- Insert the blade 19 mm (0.75 in) into the door trim
in order to disengage the retention clip.
- Press the blade firmly toward the switch plate (1,3) in
order to disengage the clip.
Notice: The retainer clip must be fully disengaged before the switch plate is
removed. Otherwise, damage to the switch plate could result.
- Pull the flat-bladed tool upward while pressing firmly toward the plate.
- Pull the plate from the trim panel.
- Disconnect the electrical connectors (2).
- Remove the switch plate (1,3).
- Use a wide, flat-bladed tool in order to release the retaining
tabs.
- Remove the switch from the switch plate.
- Remove the protective tape.
Installation Procedure
- Install the switch into the switch plate.
Evenly set the switch into the switch plate in order to snap the switch
into the retainers.
- Connect the electrical
connectors (2).
- Install the switch plate (1,3) by evenly setting the plate
into the trim panel.
- Press the plate into position in order to engage the clips on
both ends.