Radio Speaker Amplifier Replacement for Cadillac DeVille 1999
Radio Speaker Amplifier Replacement Eldorado w/ BOSE System UQ4
Removal Procedure
- Remove the rear compartment trim. Refer to
Rear Compartment Trim Panel Replacement
in Body Rear End.
- Disconnect the electrical
connector (2) from the amplifier.
- Remove the following components from the speaker assembly (1)
:
| • | The amplifier fasteners |
Installation Procedure
- Install the amplifier (3)
into the speaker (1).
- Install the fasteners.
- Connect the electrical connector (2).
- Install the rear compartment trim. Refer to
Rear Compartment Trim Panel Replacement
in Body Rear End.
Radio Speaker Amplifier Replacement DeVille/Eldorado
Removal Procedure
- Remove the electronics bay board. Refer to
Electronics Bay Board Replacement
in Body Rear
End.
- Release the retainers (3) holding the module (2) to the
bay board (4).
- Disconnect the electrical connectors (5) from the amplifier (2).
Installation Procedure
- Install the module (2) onto the electronics bay board (4).
- Connect the electrical connectors (5) to the module (2).
- Install the electronics bay board. Refer to
Electronics Bay Board Replacement
in Body Rear End.