Application | Specification | |
---|---|---|
Metric | English | |
Accelerator Controls Cable Bracket Bolts | 12 N·m | 106 lb in |
Camshaft Position Sensor | 10 N·m | 89 lb in |
Crankshaft Position (CKP) Sensors | 10 N·m | 89 lb in |
ECT Sensor | 20 N·m | 15 lb ft |
EGR Pipe | 60 N·m | 44 lb ft |
EGR Valve | 24 N·m | 18 lb ft |
EVAP Canister | 6 N·m | 53 lb in |
EVAP Canister Purge Solenoid Bolt | 12 N·m | 106 lb in |
EVAP Vent Valve Bolt | 6 N·m | 53 lb in |
Fuel Filler Pipe Clamp | 4.2 N·m | 37 lb in |
Fuel Filter Outlet Fitting | 30 N·m | 22 lb ft |
Fuel Rail End-Point Bracket Bolt | 10 N·m | 89 lb in |
Fuel Rail Assembly Bolts | 10 N·m | 89 lb in |
Fuel Sender Access Panel | 2 N·m | 18 lb in |
Fuel Tank Filler Pipe Ground Wire Attaching Bolt | 9 N·m | 80 lb in |
Fuel Tank Retaining Strap Bolts | 46 N·m | 34 lb ft |
Heated Oxygen Sensor (HO2S) | 41 N·m | 30 lb ft |
Idle Air Control Valve Attaching Bolts | 3 N·m | 27 lb in |
Ignition Coil Cassette | 9 N·m | 80 lb in |
Ignition Control Module Screws | 0.8 N·m | 7 lb in |
Intake Air Duct Clamps | 3 N·m | 27 lb in |
Knock Sensor (KS) | 25 N·m | 18 lb ft |
Powertrain Control Module (PCM) Connector Screws | 8 N·m | 71 lb in |
Rear Frame Bolts | 100 N·m | 74 lb ft |
Secondary Air Injection (AIR) System Bolts/Nuts (Pump(s), Shutoff Valves, etc.) | 9 N·m | 80 lb in |
Throttle Body Attaching Bolts | 12 N·m | 106 lb in |
Throttle Position Sensor Attaching Screws | 2.3 N·m | 20 lb in |
Waterpump Housing Bolt (EGR Crossover Pipe) | 24 N·m | 18 lb ft |