Inflatable Restraint Steering Wheel Module Coil Disassemble - Off Vehicle Power Tilt\\Telescope-Column Shift
Important: Check the main wiring harness assembly for burned 2 amp fuses
before doing this procedure. The inflatable restraint steering wheel module
coil connector connects to the main wiring harness assembly.
- Remove the upper and lower trim covers. Refer to
Steering Column Trim Covers - Disassemble - Off Vehicle
.
- Remove the retaining ring (2)
using snap ring pliers.
- Disconnect the inflatable restraint steering wheel module coil (1)
connector from the wire harness assembly.
- Slide the inflatable restraint steering wheel module coil (1)
off of the steering shaft.
Inflatable Restraint Steering Wheel Module Coil Disassemble - Off Vehicle Power Tilt and Telescope, Floor Shift
Important: Check the main wiring harness assembly for burned 2 amp fuses
before doing this procedure. The inflatable restraint steering wheel module
coil connector connects to the main wiring harness assembly.
- Remove the upper and lower trim covers. Refer to
Steering Column Trim Covers - Disassemble - Off Vehicle
.
- Remove the retaining ring (2)
using snap ring pliers.
- Disconnect the inflatable restraint steering wheel module coil (1)
connector from the wire harness assembly.
- Slide the inflatable restraint steering wheel module coil (1)
off of the steering shaft.
Inflatable Restraint Steering Wheel Module Coil Disassemble - Off Vehicle Manual Tilt, Floor Shift
- Remove the upper and lower trim covers. Refer to
Steering Column Trim Covers - Disassemble - Off Vehicle
.
- Remove the retaining ring (2)
using snap ring pliers.
- Disconnect the inflatable restraint steering wheel module coil (1)
connector from the wire harness assembly.
- Slide the inflatable restraint steering wheel module coil (1)
off of the steering shaft.
Inflatable Restraint Steering Wheel Module Coil Disassemble - Off Vehicle Manual Tilt, Column Shift
Important: Check the main wiring harness assembly for burned 2 amp fuses
before doing this procedure.
- Remove the upper and lower trim covers. Refer to
Steering Column Trim Covers - Disassemble - Off Vehicle
.
- Remove the retaining ring (2)
using snap ring pliers.
- Disconnect the inflatable restraint steering wheel module coil (1)
connector from the wire harness assembly.
- Slide the inflatable restraint steering wheel module coil (1)
off of the steering shaft.