Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle Power Tilt\\Telescope-Column Shift

Important: When removing the upper and lower trim covers, you do not have to remove the wire harness straps for the turn signal and multifunction switch assembly procedure.

1. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .



2. Disconnect the 3 connectors from the turn signal and multifunction switch assembly (3).
3. Remove the 2 pan head tapping screws (1) and (2) from the turn signal and multifunction switch assembly (3).
4. Remove the turn signal and multifunction switch assembly (3) from the steering column.

Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle Power Tilt\\Telescope, Floor Shift

Important: When removing the upper and lower trim covers, you do not have to remove the wire harness straps for the turn signal and multifunction switch assembly procedure.

1. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .



2. Disconnect the 3 connectors from the turn signal and multifunction switch assembly (3).
3. Remove the 2 pan head tapping screws (1) and (2) from the turn signal and multifunction switch assembly (3).
4. Remove the turn signal and multifunction switch assembly (3) from the steering column.

Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle Manual Tilt, Floor Shift

Important: When removing the upper and lower trim covers, you do not have to remove the wire harness straps for the turn signal and multifunction switch assembly procedure.

1. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .



2. Disconnect the connector(s) from the turn signal and multifunction switch assembly (3).
3. Remove the 2 pan head tapping screws (1) and  (2) from the turn signal and multifunction switch assembly (3).
4. Remove the turn signal and multifunction switch assembly (3) from the steering column.

Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle Manual Tilt, Column Shift

Important: Do not remove the wire harness straps for the turn signal and multifunction switch assembly procedure when removing the upper and lower trim covers.

1. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .



2. Disconnect the connector(s) from the turn signal and multifunction switch assembly (3).
3. Remove the 2 pan head tapping screws (1) and  (2) from the turn signal and multifunction switch assembly (3).
4. Remove the turn signal and multifunction switch assembly (3) from the steering column.