GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2001 🢒 DeVille 🢒 Steering 🢒 Steering Wheel and Column - Tilt 🢒 Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle

Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle Power Tilt\\Telescope-Column Shift

  1. Remove the steering column lock cylinder set. Refer to Ignition Lock Cylinder Replacement - On Vehicle .
  2. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .

    3. Object Number: 420192 Size: SH
  3. Disconnect the coded key controller connector.

    4. Object Number: 324869 Size: SH
  4. Slide the coded key controller (2) from the lock module assembly (1).

    5. Object Number: 324871 Size: SH
  5. Disconnect the green connector from the bottom of the ignition and key alarm switch assembly.
  6. Remove the lead inside the clip on the side of the ignition and key alarm switch assembly.
  7. Remove the key alarm connector (1) from the lock module assembly (4).
  8. Remove the 2 tapping screws (3) from the ignition and key alarm switch assembly (2).

Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle Power Tilt-Telescope, Floor Shift

  1. Remove the steering column lock cylinder set. Refer to Ignition Lock Cylinder Replacement - On Vehicle .
  2. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .

    3. Object Number: 420192 Size: SH
  3. Disconnect the coded key controller connector.

    4. Object Number: 324869 Size: SH
  4. Slide the coded key controller (2) from the lock module assembly (1).

    5. Object Number: 324871 Size: SH
  5. Disconnect the green connector from the bottom of the ignition and key alarm switch assembly.
  6. Remove the lead inside the clip on the side of the ignition and key alarm switch assembly.
  7. Remove the key alarm connector (1) from the lock module assembly (4).
  8. Remove the 2 tapping screws (3) from the ignition and key alarm switch assembly (2).

Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle Manual Tilt, Floor Shift

  1. Remove the steering column lock cylinder set. Refer to Ignition Lock Cylinder Replacement - On Vehicle .
  2. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .

    3. Object Number: 420192 Size: SH
  3. Disconnect the coded key controller connector.

    4. Object Number: 324869 Size: SH
  4. Slide the coded key controller (2) from the lock module assembly (1).

    5. Object Number: 324871 Size: SH
  5. Disconnect the connector from the bottom of the ignition and key alarm switch assembly (2).
  6. Remove the lead inside the clip on the side of the ignition and key alarm switch assembly (2).
  7. Remove the key alarm connector (1) from the lock module assembly (4).
  8. Remove the 2 tapping screws (3) from the ignition and key alarm switch assembly (2).

Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle Manual Tilt, Column Shift

  1. Remove the steering column lock cylinder set. Refer to Ignition Lock Cylinder Replacement - On Vehicle .
  2. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .

    3. Object Number: 420192 Size: SH
  3. Disconnect the coded key controller connector.

    4. Object Number: 324869 Size: SH
  4. Slide the coded key controller (2) from the lock module assembly (1).

    5. Object Number: 324871 Size: SH
  5. Disconnect the connector(s) from the bottom of the ignition and key alarm switch assembly (2).
  6. Remove the lead inside the clip on the side of the ignition and key alarm switch assembly (2).
  7. Remove the key alarm connector (1) from the lock module assembly (4).
  8. Remove the 2 tapping screws (3) from the ignition and key alarm switch assembly (2).