Wire Harness Assembly - Disassemble - Off Vehicle Power Tilt\\Telescope-Column Shift

Important: Check the main wiring harness assembly for burned 2 amp fuses before doing this procedure.

1. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .



2. Disconnect all connectors attached to the wire harness assembly.
3. Slide the bulkhead connector out from the column shift and tilt motor bracket assembly.

Wire Harness Assembly - Disassemble - Off Vehicle Power Tilt and Telescope, Floor Shift

Important: Check the main wire harness assembly for burned 2 amp fuses before doing this procedure.

1. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .



2. Disconnect all connectors attached to the wire harness assembly.
3. Slide the bulkhead connector out from the column shift and tilt motor bracket assembly.

Wire Harness Assembly - Disassemble - Off Vehicle Manual Tilt, Floor Shift

Important: Check the main wire harness assembly for burned 2 amp fuses before doing this procedure.

1. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .



2. Disconnect all connectors attached to the wire harness assembly.
3. Remove the bulkhead connector.

Wire Harness Assembly - Disassemble - Off Vehicle Manual Tilt, Column Shift

Important: Check the main wire harness assembly for burnt 2 amp fuses before doing this procedure.

1. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle .



2. Disconnect all connectors attached to the wire harness assembly.
3. Remove the bulkhead connector.