Removal Procedure
- Remove the left console trim panel. Refer to
Front Floor Console Side Trim Panel Replacement - Left Side
in Instrument Panel, Gauges,
and Console (2).
- Locate the rear zone temperature sensor, located below the rear
blower motor on the rear blower motor assembly (2).
- Grasp the sensor and rotate the sensor ¼ turn in
order to release the sensor from the rear blower motor assembly.
- Remove the sensor from the blower motor assembly.
- Disconnect the electrical
connector (1) from the rear temperature sensor (2) and remove
the sensor.
Installation Procedure
- Connect the rear temperature
sensor (2) to the temperature sensor connector (1).
- Install the sensor in the rear blower motor assembly, rotate the
sensor ¼ turn in order to secure the sensor (2) in the
duct.
- Install the left console trim panel. Refer to
Front Floor Console Side Trim Panel Replacement - Left Side
in Instrument Panel, Gauges,
and Console.