Night Vision Camera Replacement Design 1

Important: 

•	The first design night vision camera is not serviceable and must be sent to an authorized service center for repair.

The second design night vision camera has a serviceable window/lens. the second design camera can be recognized by the electrical connection below the window/lens.

•	If the night vision camera is removed or adjusted for any reason, it must be aimed. Refer to Night Vision Camera Aiming .

1. Open and support the hood.



2. Disconnect the night vision camera electrical connector.



3. Turn the three camera retainers (1) 90 degrees and remove the camera from the mounting bracket.
4. Remove the night vision camera.

Important: Make sure the retainers are fully turned and in the locked position.




1. Install the night vision camera to the mounting bracket and turn the retainers (1) 90 degrees.



2. Connect the electrical connector.
3. Perform aiming procedure for night vision camera. Refer to Night Vision Camera Aiming .

Night Vision Camera Replacement Design 2

Important: 

•	The first design night vision camera is not serviceable and must be sent to an authorized service center for repair.

The second design night vision camera has a serviceable window/lens. the second design camera can be recognized by the electrical connection below the window/lens.

•	If the night vision camera is removed or adjusted for any reason, it must be aimed. Refer to Night Vision Camera Aiming .

1. Open and support the hood.



2. Disconnect the night vision camera (1) electrical connectors (2).



3. Turn the three camera retainers (1) 90 degrees in order to remove the camera from the mounting bracket.
4. Remove the night vision camera.

Important: Make sure the retainers are fully turned and in the locked position.




1. Install the night vision camera to the mounting bracket and turn the retainers (1) 90 degrees.



2. Connect the electrical connectors (2).
3. Perform aiming procedure for night vision camera (1). Refer to Night Vision Camera Aiming .