Wiring Harness Replacement - Inflatable Restraint - Passenger Seat V4U, APL

Caution: When you are performing service on or near the SIR components or the SIR wiring, you must disable the SIR system. Refer to Disabling the SIR System. Failure to follow the correct procedure could cause air bag deployment, personal injury, or unnecessary SIR system repairs.

1. Disable the SIR system. Refer to Disabling the SIR System .
2. Pull back the carpet on the right side of the console in order to access the wiring harness.
3. Pull the harness from under the carpet.
4. Remove the Connector Position Assurance (CPA) from the electrical connector.
5. Disconnect the electrical connector (1).
6. Remove the Passenger Seat Inflatable Restraint Harness Assembly (2).

1. Install the Passenger Seat Inflatable Restraint Harness Assembly (2).
2. Connect the electrical connector (1).
3. Install the CPA to the electrical connector.
4. Tuck the harness behind the carpet on the right side of the console.
5. Reposition the carpet.
6. Enable the SIR system. Refer to Enabling the SIR System .