For 1990-2009 cars only
Removal Procedure
- Insert your fingers between the headliner and the information center telltale assembly bezel and gently pull down to release the display bezel.
- Use a screwdriver to release the locking tab at the rear of the telltale assembly.
- Tilt the display down and pull down to remove.
- Disconnect the electrical connector.
Installation Procedure
- Connect the electrical connector to the information center telltale assembly.
- Insert the display into the headliner until locking tab locks into position. It may be necessary to rock the display into position.
- Install bezel by pushing it up until the tabs lock into position.
