GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2002 🢒 DeVille 🢒 Body and Accessories 🢒 Exterior Trim 🢒 Grille Replacement

Removal Procedure
  1. Open the hood.

    2. Object Number: 456010 Size: SH
  2. Remove the fasteners (3) retaining the grille supports (2) to the hood (1).
  3. Remove the fasteners retaining the grille supports (2) to the grille (4).
  4. Remove the grille supports (2) from the grille (4).

    5. Object Number: 456013 Size: SH
  5. Remove the nuts (3) and the 2 screws retaining the grille (2) to the hood (1).
  6. Remove the grille (2) from the hood (1).

Installation Procedure

    Object Number: 456013 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the 2 screws to retain the grille (2) to the hood (1).

    2. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  2. Install the nuts (3) to retain the grille (2) to the hood (1).

    3. Tighten
    Tighten the nuts to 9 N·m (80 lb in).

  3. Install the grille supports to the grille.

    4. Important: Loosely install all of the grille retaining fasteners before tightening.

  4. Install the nuts to retain the grille support to the grille.

    5. Tighten
    Tighten the nuts to 6 N·m (53 lb in).


    Object Number: 456010 Size: SH
  5. Install the fasteners (3) to retain the grille supports (2) to the hood (1).

    6. Tighten
    Tighten the fasteners to 9 N·m (80 lb in).

  6. Close the hood.