Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: The cruise control system operates properly, but the CRUISE Indicator does not illuminate during cruise control operation. Schematic Reference Cruise Control Schematics | ||||
1 | Did you perform A Diagnostic System Check - Cruise Control? | -- | Go to Step 2 | |
2 |
Does the scan tool display Yes? | -- | Go to Step 3 | Go to Step 4 |
3 |
Does the CRUISE indicator illuminate during the bulb check? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 9 |
4 |
Does the scan tool display Yes? | -- | Go to Step 7 | Go to Step 5 |
5 | Test the cruise engaged signal circuit for a open, high resistance or short to voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 11 | Go to Step 6 |
6 | Inspect for poor connections at the harness connector of the powertrain control module (PCM). Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 11 | Go to Step 8 |
7 | Inspect for poor connections at the harness connector of the cruise control module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 11 | Go to Step 10 |
8 |
Important: The PCM must be re-programed after replacement. Refer to Powertrain Control Module Programming in Engine Controls - 4.6L. Replace the PCM. Refer to Powertrain Control Module Replacement in Engine Controls - 4.6L. Did you complete the replacement? | -- | Go to Step 11 | -- |
9 | Replace the instrument cluster (IPC). Refer to Instrument Cluster Replacement in Instrument Panel, Gages and Console. Did you complete the replacement? | -- | Go to Step 11 | -- |
10 | Replace the cruise control module. Refer to Cruise Control Module Replacement . Did you complete the replacement? | -- | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
