Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement for Cadillac DeVille 2002
Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Remove the front air deflector. Refer to
Front Air Deflector Replacement
in Body Front End.
- Disconnect the electrical connector from the A/C refrigerant pressure sensor (1).
- Remove the A/C refrigerant pressure sensor.
Installation Procedure
- Lubricate the O-ring with 525 refrigerant oil.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the A/C refrigerant pressure sensor (1).
Tighten
Tighten the sensor to 5 N·m (44 lb in).
- Install the electrical connector to the A/C refrigerant pressure sensor.
- Install the front air deflector. Refer to
Front Air Deflector Replacement
in Body Front End.
- Lower the vehicle.