Indentation of Rear Fascia near URPA Sensor - kw appearance body

When servicing the vehicle with the VIN you entered, the following diagnosis might be helpful if the vehicle exhibits the described symptoms.

Some customers may comment that there is an indentation around one of the URPA sensors in the rear fascia.

To correct the condition, remove the rear bumper cover and URPA sensor, and heat the area with a heat gun. This will allow the fascia to return to its normal appearance.

.

Please follow this diagnosis process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed. If these steps do not resolve the condition, please contact GM TAC for further diagnostic assistance. This diagnostic approach was developed for the vehicle with the VIN you entered and should not be automatically be used for other vehicles with similar symptoms.

(2000-04 Cadillac Deville) and (1998-04 Cadillac Seville) and (2004 Cadillac SRX)

.