GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2003 🢒 DeVille 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Release Solenoid Replacement

Removal Procedure
  1. Remove the left closeout/insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages, and Console.
  2. Remove the left knee bolster. Refer to Driver Knee Bolster Replacement in Instrument Panel, Gages, and Console.
  3. Remove the left carpet retainer. Refer to Front Carpet Retainer Replacement in Interior Trim.

    4. Object Number: 107329 Size: SH
  4. Remove the park brake pedal assembly nuts (1, 2).
  5. Position the park brake pedal assembly away from the mounting studs.
  6. Disconnect the electrical connectors from the park brake lever.

    7. Object Number: 666699 Size: SH
  7. Remove park brake automatic release solenoid bolt (1).
  8. Remove the park brake automatic release solenoid (2).

Installation Procedure

    Object Number: 666699 Size: SH
  1. Install the park brake automatic release solenoid (2).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install park brake automatic release solenoid bolt (1).

    3. Tighten
    Tighten the park brake automatic release solenoid bolt to 24 N·m (18 lb ft).


    Object Number: 107329 Size: SH
  3. Connect the electrical connectors to the park brake pedal assembly.
  4. Install the park brake pedal assembly to the mounting studs.
  5. Install the park brake pedal assembly mounting nuts (1, 2).

    6. Tighten
    Tighten the park brake pedal assembly mounting nuts to 24 N·m (18 lb ft).

  6. Install the left knee bolster. Refer to Driver Knee Bolster Replacement in Instrument Panel, Gages, and Console.
  7. Install the left closeout/insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages, and Console.
  8. Install the left carpet retainer. Refer to Front Carpet Retainer Replacement in Interior Trim.