GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2003 🢒 DeVille 🢒 Steering 🢒 Steering Wheel and Column 🢒 Linear Shift Assembly Replacement

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.

  1. Disable the SIR system. Refer to SIR Disabling and Enabling in SIR.
  2. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement .

    3. Object Number: 324906 Size: SH
  3. Remove the A/T shift lock actuator.

    4. Object Number: 324874 Size: SH
  4. Ensure that the Ignition switch is in the OFF lock position
  5. Disconnect the park lock cable (1) by inserting a small screwdriver into the slot on the ignition lock cylinder case assembly. Push against the locking tab to remove.

    6. Object Number: 324916 Size: SH
  6. Remove the flat head tapping screws from the linear shift assembly.
  7. Remove the linear shift assembly.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 324916 Size: SH
  1. Install the linear shift assembly and the tapping screws.

    2. Tighten
    Tighten the screws to 10 N·m (89 lb in).


    Object Number: 324874 Size: SH
  2. Connect the park lock cable assembly (1) to the ignition lock cylinder case assembly.

    3. Object Number: 324906 Size: SH
  3. Install the A/T shift lock actuator.
  4. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
  5. Enable the SIR system. Refer to SIR Disabling and Enabling in SIR.