Caution: Do NOT attempt to repair or alter the bracket on the child seat restraint system. If the bracket is damaged, replace the entire bracket. Altering the bracket could result in personal injury.

1. Remove the rear seat back. Refer to Rear Seat Back Replacement



2. Remove the outer seat belt anchor bolts.
3. Postion the lower portion of the rear seat back sound barrier out of the way.



4. Remove the nuts (2) securing the bracket (1) to the vehicle.
5. Remove the bracket (1) from the vehicle in Seats.

1. Position the bracket (1) to the vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the nuts (2).

Tighten
Tighten the nuts to 41 N·m (30 lb ft).

3. Reposition the rear seat sound barrier to its original position.



4. Install the outer seat belt anchor bolts.

Tighten
Tighten the bolts to 41 N·m (30 lb ft).

5. Install the rear seat back. Refer to Rear Seat Back Replacement .