Removal Procedure
- Remove the instrument
panel (IP) storage compartment. Refer to
Instrument Panel Storage Compartment Replacement
in Instrument Panel, Gages, and
Console.
- Disconnect the electrical connector (2) from the IP storage
compartment lamp switch (1).
- Remove the IP storage
compartment lamp switch (1) from the IP storage compartment, by squeezing
the tabs on both sides of the switch (1) and pulling the IP storage
compartment lamp switch (1) out of the opening.
Installation Procedure
- Install the IP storage
compartment lamp switch (1) to the IP storage compartment.
- Connect the electrical
connector (2) to the IP storage compartment lamp switch (1).
- Install the IP compartment. Refer to
Instrument Panel Storage Compartment Replacement
in Instrument Panel, Gages,
and Console.