Schematic Reference: Interior Lights Schematics

Connector End View Reference: Lighting Systems Connector End Views

1

Did you perform the Lighting Systems Diagnostic System Check?

Go to Step 2

Go to Diagnostic System Check - Lighting Systems

1. Turn ON the ignition, with the engine OFF.
2. Open the vanity mirror cover.
3. Place the vanity mirror lamp dimmer switch in from the DIM to the BRIGHT position.
4. Close the vanity mirror cover.

Did the vanity mirror lamp operate properly?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

Inspect for poor connections at the harness connector of the vanity mirror lamp. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 5

Go to Step 4

Replace the vanity mirror lamp. Refer to Vanity Mirror Lamp Replacement .

Did you complete the replacement?

Go to Step 5

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2