GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2003 🢒 DeVille 🢒 Body and Accessories 🢒 Instrument Panel, Gages, and Console 🢒 Driver Information Display Switch Replacement

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.

  1. Remove the IP cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement .

    2. Object Number: 493829 Size: SH
  2. Remove the fasteners from the drivers information switch.

    3. Object Number: 493828 Size: SH
  3. Remove the drivers information switch from the IP cluster trim panel.

Installation Procedure

    Object Number: 493828 Size: SH
  1. Install the drivers information switch to the IP cluster trim panel.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 493829 Size: SH
  2. Install the fasteners.

    3. Tighten
    Tighten the fasteners to 2 N·m (18 lb in).

  3. Install the IP cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement .