| Table 1: | Indicators |
| Table 2: | DIC Warning Messages |
Symbol | Description |
|---|---|
| ABS: Refer to ABS Description and Operation in Antilock Brake System |
(Canada) AIR BAG (U.S.) | Air Bag: Refer to SIR System Description and Operation in SIR |
BRAKE 
| Brake: Refer to Brake Warning System Description and Operation in Hydraulic Brakes |
| Charge: Refer to Charging System Description and Operation in Engine Electrical |
CRUISE | Cruise: Refer to Cruise Control Description and Operation in Cruise Control |
| Engine Coolant Temperature: Refer to Cooling System Description and Operation in Engine Cooling |
| Fasten Safety Belt: Refer to Seat Belt System Description and Operation in Seat Belts |
| Front Fog Lamps: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
| High Beam: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
km/h | The IPC illuminates the km/h indicator when the IPC detects that metric units have been requested. The IPC monitors the signal circuit of the ENG/MET button of the DIC switch. |
(Canada) LIGHTS ON (U.S.) | Lights On: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
| The IPC illuminates the engine oil pressure indicator when the PCM detects low oil pressure, and the signal circuit is low. The IPC receives a class 2 message requesting illumination from the PCM. |
MPH | The IPC illuminates the MPH indicator when the IPC detects that English units have been requested. The IPC monitors the signal circuit of the ENG/MET button of the DIC switch. |
SECURITY | Security: Refer to Theft Systems Description and Operation in Theft Deterrent |
(Canada) SERVICE ENGINE SOON (U.S.) | Malfunction Indicator Lamp (MIL): Refer to Powertrain Control Module Description in Engine Controls - 4.6L |
(Canada) TRACTION CONTROL (U.S.) | Traction Control: Refer to ABS Description and Operation in Antilock Brake System |
| Turn Signals: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
The DIC warning message reference numbers are for export vehicles only.
Symbol | Description | ||||||||
|---|---|---|---|---|---|---|---|---|---|
BATTERY NOT CHARGING - 7 | Refer to Charging System Description and Operation in Engine Electrical | ||||||||
BATTERY SAVER ACTIVE - 27 | Refer to Charging System Description and Operation in Engine Electrical | ||||||||
BATTERY VOLTAGE HIGH - 8 | Refer to Charging System Description and Operation in Engine Electrical | ||||||||
BATTERY VOLTAGE LOW - 6 | Refer to Charging System Description and Operation in Engine Electrical | ||||||||
CHANGE ENGINE OIL - 82 | The instrument panel cluster (IPC) illuminates the CHANGE ENGINE OIL -- 82 message in the driver information center (DIC) when the powertrain control module (PCM) determines that the engine oil life is 0 percent. The IPC receives a class 2 message from the PCM requesting illumination. After the oil is changed, reset the engine oil monitor. Refer to GM Oil Life System Resetting in Maintenance and Lubrication. | ||||||||
CHANGE TRANS FLUID - 47 | Refer to Transmission Component and System Description in Automatic Transaxle - 4T80-E | ||||||||
CHECK BRAKE FLUID - 37 | Refer to Brake Warning System Description and Operation in Hydraulic Brakes | ||||||||
CHECK COOLANT LEVEL - 2 | Refer to Cooling System Description and Operation in Engine Cooling | ||||||||
CHECK FUEL GAGE - 50 | The IPC illuminates the CHECK FUEL GAGE -- 50 message in the DIC when the IPC is in the gages OFF mode and the fuel level is less than 18.9 liters (5 gallons). The message will be cleared when IPC detects that the fuel level is at least 27.1 liters (7 gallons). The IPC receives a class 2 message from the PCM indicating the fuel level. | ||||||||
CHECK GAS CAP - 61 | Refer to Powertrain Control Module Description in Engine Controls - 4.6L | ||||||||
CHECK OIL LEVEL - 36 | The IPC illuminates the CHECK OIL LEVEL -- 36 message in the DIC when the PCM detects low engine oil level and the signal circuit is high. The PCM briefly monitors the engine oil level switch at predetermined intervals. The IPC receives a class 2 message requesting illumination from the PCM. | ||||||||
CHECK TIRE PRESSURE - 144 | Refer to Tire Pressure Monitor Description and Operation in Tire Pressure Monitoring | ||||||||
CHECK WASHER FLUID - 25 | Refer to Wiper/Washer System Description and Operation in Wipers/Washer Systems | ||||||||
DRIVER DOOR AJAR - 140 | Refer to Door Ajar Indicator Description and Operation in Doors | ||||||||
DRIVER NO X | Refer to Driver Personalization in Personalization | ||||||||
ENGINE COOLANT HOT, IDLE ENGINE - 44 | Refer to Cooling System Description and Operation in Engine Cooling | ||||||||
ENGINE HOT - AC OFF - 16 | Refer to Cooling System Description and Operation in Engine Cooling | ||||||||
ENGINE OVERHEATED, STOP ENGINE - 42 | Refer to Cooling System Description and Operation in Engine Cooling | ||||||||
ENGINE POWER REDUCED - 41 | Refer to Powertrain Control Module Description in Engine Controls - 4.6L | ||||||||
FUEL LEVEL LOW - 11 | The IPC illuminates the FUEL LEVEL LOW -- 11 message in the DIC when the IPC detects that the fuel level is less than 11.4 liters (3 gallons). The message will be cleared when IPC detects that the fuel level is at least 15 liters (4 gallons). The IPC receives a class 2 message from the PCM indicating the fuel level. | ||||||||
HEADLAMPS SUGGESTED - 23 | Refer to Exterior Lighting Systems Description and Operation in Lighting Systems | ||||||||
ICE POSSIBLE - 13 | The IPC illuminates the ICE POSSIBLE -- 13 message in the DIC when the outside air temperature drops below 2.2°C (36°F). The IPC receives a class 2 message indicating the outside air temperature from the instrument panel module (IPM). | ||||||||
LEFT REAR DOOR AJAR - 142 | Refer to Door Ajar Indicator Description and Operation in Doors | ||||||||
OIL PRESSURE LOW STOP ENGINE - 35 | The IPC illuminates the OIL PRESSURE LOW STOP ENGINE -- 35 message in the DIC when the PCM detects low engine oil pressure, and the signal circuit is low. The IPC receives a class 2 message requesting illumination from the PCM. | ||||||||
PASSENGER DOOR AJAR - 141 | Refer to Door Ajar Indicator Description and Operation in Doors | ||||||||
RIGHT REAR DOOR AJAR - 143 | Refer to Door Ajar Indicator Description and Operation in Doors | ||||||||
SERVICE AC SYSTEM - 14 | Refer to Air Temperature Description and Operation in HVAC Systems - Automatic | ||||||||
SERVICE AIR BAG - 83 | Refer to SIR System Description and Operation in SIR | ||||||||
SERVICE CHARGING SYS - 102 | Refer to Charging System Description and Operation in Engine Electrical | ||||||||
SERVICE ELECTRICAL SYS - 106 | The IPC illuminates the SERVICE ELECTRICAL SYS -- 106 message in the DIC when one of the following conditions exist:
| ||||||||
SERVICE FUEL SYSTEM - 101 | Refer to Powertrain Control Module Description in Engine Controls - 4.6L | ||||||||
SERVICE IDLE CONTROL - 107 | Refer to Powertrain Control Module Description in Engine Controls - 4.6L | ||||||||
SERVICE STABILITY SYS - 54 | Refer to ABS Description and Operation in Antilock Brake System | ||||||||
SERVICE STEERING SYS - 127 | Refer to Variable Effort Steering System Description and Operation in Variable Effort Steering | ||||||||
SERVICE SUSPENSION SYS - 84 | Refer to Electronic Suspension Control Description and Operation in Electronic Suspension Control (ESC) | ||||||||
SERVICE THEFT SYSTEM - 34 | Refer to Theft Systems Description and Operation in Theft Deterrent | ||||||||
SERVICE TIRE MONITOR - 51 | Refer to Tire Pressure Monitor Description and Operation in Tire Pressure Monitoring | ||||||||
SERVICE TRANSMISSION - 100 | Refer to Transmission Component and System Description in Automatic Transaxle - 4T80-E | ||||||||
SERVICE VEHICLE SOON - 3 | The IPC illuminates the SERVICE VEHICLE SOON -- 3 message in the DIC when the PCM detects certain malfunctions that are unrelated to the emission system. The IPC receives a class 2 message requesting illumination from the PCM . | ||||||||
SPEED LIMITED TO XXX - 113 | Refer to Electronic Suspension Control Description and Operation in Electronic Suspension Control (ESC) | ||||||||
STABILITY SYS ENGAGED - 55 | Refer to ABS Description and Operation in Antilock Brake System | ||||||||
STARTING DISABLED REMOVE KEY - 33 | Refer to Theft Systems Description and Operation in Theft Deterrent | ||||||||
THEFT ATTEMPTED - 40 | Refer to Theft Systems Description and Operation in Theft Deterrent | ||||||||
TOP SPEED FUEL CUT-OFF - 111 | Refer to Powertrain Control Module Description in Engine Controls - 4.6L | ||||||||
TRACTION ENGAGED - 91 | Refer to ABS Description and Operation in Antilock Brake System | ||||||||
TRACTION OFF - 89 | Refer to ABS Description and Operation in Antilock Brake System | ||||||||
TRACTION READY - 90 | Refer to ABS Description and Operation in Antilock Brake System | ||||||||
TRACTION SUSPENDED - 56 | Refer to ABS Description and Operation in Antilock Brake System | ||||||||
TRANS HOT IDLE ENGINE - 112 | Refer to Transmission Component and System Description in Automatic Transaxle - 4T80-E | ||||||||
TRUNK OPEN - 24 | Refer to Luggage Compartment Description and Operation in Body Rear End | ||||||||
TURN SIGNAL ON - 20 | Refer to Exterior Lighting Systems Description and Operation in Lighting Systems | ||||||||
VEHICLE OVERSPEED - 52 | The IPC illuminates the VEHICLE OVERSPEED -- 52 message in the DIC when the PCM detects that the vehicle speed is greater than 120 km/h (74.5 mph). The IPC receives a class 2 message requesting illumination from the PCM. |
