Schematic Reference: Cruise Control Schematics

1

Did you perform A Diagnostic System Check - Cruise Control?

--

Go to Step 2

Go to Diagnostic System Check - Cruise Control

1. Turn OFF the ignition.
2. Turn ON the ignition, with the engine OFF.
3. Observe the CRUISE indicator on the instrument cluster (IPC) during the bulb check.

Does the suspect indicator illuminate during the bulb check and then turn OFF?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

Replace the instrument cluster (IPC). Refer to Instrument Cluster Replacement in Instrument Panel, Gages and Console.

Did you complete the repair?

--

Go to Step 4

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 2