Removal Procedure
- Remove the fuel injector sight shield, if necessary.
- Remove the ignition control module (ICM) ground strap bolt (3) from the cylinder head.
- Loosen the ICM ground strap bolt (1) from the camshaft cover.
- Remove the ICM ground strap (2).
- Remove the ICM ground strap bolt (3) from the cylinder head.
- Loosen the ICM ground strap bolt (1) from the camshaft cover.
- Remove the ICM ground strap (2).
Installation Procedure
- Install the ICM ground strap (2).
Notice: Refer to Fastener Notice in the Preface section.
- Tighten the ICM ground strap bolt (1) to the camshaft cover.
Tighten
Tighten the bolt to 10 N·m (89 lb in).
- Install the ICM ground strap bolt (3) to the cylinder head.
Tighten
Tighten the bolt to 25 N·m (18 lb ft).
- Install the ICM ground strap (2).
- Tighten the ICM ground strap bolt (1) to the camshaft cover.
Tighten
Tighten the bolt to 10 N·m (89 lb in).
- Install the ICM ground strap bolt (3) to the cylinder head.
Tighten
Tighten the bolt to 10 N·m (89 lb in).
- Install the fuel injector sight shield, if necessary.