Tools Required
• | J 41816
Crankshaft
Balancer Remover |
- Install the
J 44214
to the engine block.
- Secure the flywheel in order to prevent crankshaft rotation.
- Remove the crankshaft balancer bolt.
- Place
the
J 38416-2
in the end of the crankshaft.
- Position the legs of the
J 41816
onto the backside of the balancer inner hub.
- Tighten the center screw on the puller until the balancer pulls clear
of the crankshaft end.
- Remove the crankshaft balancer.