GM Service Manual Online
For 1990-2009 cars only

Tools Required

J 44212 Camshaft Holding Tool


    Object Number: 650538  Size: SH
  1. Remove the J 44212 from the right cylinder head camshafts.

  2. Object Number: 522725  Size: SH
  3. Ensure new camshaft cover seals are installed.
  4. Place the right camshaft cover in position on the cylinder head by aligning the bolt holes.
  5. Install the NEW camshaft cover bolt grommets prior to installing the camshaft cover bolts.
  6. Notice: Refer to Fastener Notice in the Preface section.

  7. Install the camshaft cover bolts.
  8. Tighten
    Tighten the camshaft cover bolts to 10 N·m (89 lb in).


    Object Number: 1207139  Size: SH
  9. Install the right ignition coil ground strap to the right cylinder head and right camshaft cover.
  10. Install the right cylinder head ignition coil ground strap bolt.
  11. Tighten
    Tighten the right cylinder head ignition coil ground strap bolt to 25 N·m (18 lb ft).

  12. Install the right camshaft cover ignition coil ground strap bolt.
  13. Tighten
    Tighten the right camshaft cover ignition coil ground strap bolt to 10 N·m (89 lb in).