Notice: Refer to Fastener Notice in the Preface section.
- Install the left spark plugs.
Tighten
Tighten the spark plugs to 15 N·m (11 lb ft).
- Apply a small amount of dielectric grease GM P/N 12345579, (Canadian P/N 1974984), to each spark plug boot (1) of the ignition coil assembly.
- Install the ignition coil assembly.
- Install the ignition coil assembly bolts.
Tighten
Tighten the ignition coil assembly bolts to 10 N·m (89 lb in).
- Install the jump start grounding bracket to the left cylinder head.
- Install the jump start grounding bracket bolts to the left cylinder head.
Tighten
Tighten the jump start grounding bracket bolts to 20 N·m (15 lb ft).