- Install the rear lift bracket.
Notice: Refer to Fastener Notice in the Preface section.
- Install the rear lift bracket bolts.
Tighten
Tighten the rear lift bracket bolts to 47 N·m (35 lb ft).
- Install the right spark plugs.
Tighten
Tighten the spark plugs to 15 N·m (11 lb ft).
- Apply a small amount of dielectric grease GM P/N 12345579, (Canadian P/N 1974984), to each spark plug boot (1) of the ignition coil assembly.
- Install the ignition coil assembly.
- Install the ignition coil assembly bolts and ball studs.
Tighten
Tighten the ignition coil assembly bolts and ball studs to 10 N·m (89 lb in).
- If equipped, install the fuel injector sight shield
bracket.
- Install the fuel injector sight shield bracket bolts.
Tighten
Tighten the fuel injector sight shield bracket bolts to 10 N·m (89 lb in).
- Install the ignition coil assembly sight shield cover.