GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 DeVille 🢒 Engine 🢒 Engine Mechanical - 4.6L 🢒 Auxiliary Drive Belt Replacement

Removal Procedure

    Object Number: 761047 Size: SH
  1. Loosen the auxiliary generator mounting bolts (1, 2).
  2. Remove the auxiliary drive belt.

Installation Procedure

    Object Number: 761047 Size: SH
  1. Position the auxiliary drive belt to the pulleys.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. While pulling upward on the auxiliary generator tighten the auxiliary generator adjusting bolt (1).

    3. Tighten
    Tighten the auxiliary generator adjusting bolt (1) to 25 N·m (18 lb ft).

  3. Tighten the auxiliary generator mounting bolt (2).

    4. Tighten
    Tighten the auxiliary generator mounting bolt (2) to 30 N·m (22 lb ft).

  4. Start the engine and check for proper belt and accessory operation.