Removal Procedure
- Remove the cruise control cable. Refer to Cruise Control Cable Replacement .
- Disconnect the electrical connector from the cruise control module assembly (2).
- Remove the nuts (3) and the bolt (1) from the cruise control module assembly (2).
- Remove the cruise control module assembly (2).
- Remove the fasteners (3) retaining the bracket (4) to the cruise control module (1).
- Remove the cruise control module (1) from the mounting bracket (4).
Installation Procedure
- Install the cruise control module (1) on the mounting bracket (4).
- Install the fasteners (3) which retain the bracket to the module.
- Install the cruise control module assembly (2) to the body.
- Install the 2 nuts (3) and the bolt (1).
- Connect the electrical connector to the cruise control module (1).
- Install the cruise control cable. Refer to Cruise Control Cable Replacement .
- Refer to Control Module References for programming and setup information.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the fasteners to 7.5 N·m (66 lb in).
Tighten
Tighten the nuts and the bolt to 9 N·m (80 lb in).
Important: The cruise control cable does not require mechanical adjusting after the replacement. The cruise control module internally adjusts the cable. Refer to Cruise Control Description and Operation for the complete operational details.
