GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 DeVille 🢒 Engine 🢒 Engine Controls - 4.6L 🢒 Accelerator Pedal Replacement

Removal Procedure

    Object Number: 154846 Size: SH
  1. Remove the left closeout/insulator panel replacement. Refer to Instrument Panel Insulator Panel Replacement - Left Side in instrument Panel, Gauges, and Console.
  2. Remove the clip (2) from the pedal (3).
  3. Remove the plastic retainer from inside the pedal.
  4. Remove the accelerator control cable (1) from the accelerator controls pedal by pulling straight out and up towards the top of the accelerator controls pedal.
  5. Remove the accelerator controls pedal from the brake and accelerator controls pedal assembly.

Installation Procedure

    Object Number: 65341 Size: SH
  1. Install the accelerator control pedal (2) to the brake and accelerator controls pedal assembly.
  2. Install the plastic retainer inside the accelerator controls pedal.
  3. Install the clip onto the accelerator controls pedal.
  4. Install the accelerator control cable (1) to the pedal by pulling the accelerator controls pedal straight out and down towards the top of the accelerator control pedal.

    5. Important: The throttle should operate freely without binding between full closed and wide open throttle.

  5. Check for complete throttle opening and closing positions by operating the accelerator controls pedal. Also check for poor carpet fit under the accelerator controls pedal.
  6. Install the left closeout/insulator panel replacement. Refer to Instrument Panel Insulator Panel Replacement - Left Side in instrument Panel, Gauges, and Console.