Removal Procedure
- Lift at the front of the fuel injector sight
shield (1) in order to disengage from the intake manifold ball studs (2).
- Remove the sight shield (1) from the engine.
Installation Procedure
- Position the fuel injector sight shield (1)
to the engine in the following order:
1.1. | Insert the sight shield (1) under the secondary air injection (AIR)
shut-off valve bracket. |
1.2. | Align the sight shield (1) over the manifold ball studs (2). |
- Push the sight shield (1) down until fully engaged to the intake
manifold ball studs (2).