Removal Procedure
- Remove the rear seat back. Refer to
Rear Seat Back Replacement
in Seats.
- Remove the rear shelf panel assembly. Refer to
Rear Window Shelf Trim Panel Replacement
in Interior Trim.
- Remove the fasteners (1)
retaining the rear sunshade (2) to the rear shelf (3).
- Remove the rear sunshade assembly (2) from the rear shelf (3).
Installation Procedure
- Install the rear sunshade (2)
to the rear shelf (3).
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the fasteners (1)
in order to retain the rear sunshade (2) to the rear shelf (3).
Tighten
Tighten the retainer fasteners to 25 N·m (18 lb ft).
- Install the rear shelf panel. Refer to
Rear Window Shelf Trim Panel Replacement
in Interior Trim.
- Install the rear seat back. Refer to
Rear Seat Back Replacement
in Seats.
- Install rear seat cushion. Refer to
Rear Seat Cushion Replacement
in Seats.