Scan Tool Data Definitions W/O F45
Accum Fault-- Compressor: A defined period of time that the compressor is active with out
an exhaust cycle.
Accum Fault--Exhaust: A defined period of time the exhaust is active with out a compressor
cycle.
ALC Compressor Active: Indicates when the compressor is running or not running.
ALC Exhaust Solinoid Active: Indicates when the exhaust solinoid is on or off.
ALC Trimset: This procedure reprograms the RIM with the vehicles ride height
specification, per the suspension option.
Battery low--Compressor: Indicates when there is low voltage at compressor from battery.
Calibration I.D.: This number designates the modules calibration.
Filtered Position Valve: As the vehicle operates the suspension position sensor is monitored,
and the information is filtered, to the RIM so it can adjust the suspension.
Leveling Sensor Feed: Voltage feed to the suspension position sensor.
Progress Fault-- Compressor: A defined period of time that the compressor is active and no change
is detected by the suspension position sensor.
Progress Fault--Exhaust: A defined period of time the exhaust is active and no change is
detected by the suspension position sensor.
Prom I.D.: The modules internal "PROM" identifier.
Suspension Position Sensor: Indicates the sensor signal voltage to the control module.
Trim Value: Vehicle trim height value programmed in the RIM.
Scan Tool Data Definitions W/F45
ALC Compressor: This indicates when the compressor is running.
ALC Exhaust Solenoid : This indicates when the exhaust solenoid is on.
Battery Voltage Signal: This indicates the voltage present at the control module.
DSP Software Version ID: This number indicates the ID of the software version.
EEPROM Calibration ID: This number indicates the calibration ID.
GM Part Number: Indicates the 8 digit GM part number of the module.
GMSCM Software Version: This number indicates version of software in the control module.
LR Position Sensor: Indicates the signal voltage at the control module.
RR Position Sensor: Indicates the signal voltage at the control module.