Removal Procedure
- Open the rear compartment lid.
- Remove the rear compartment lid trim panel. Refer to
Rear Compartment Lid Inner Panel Trim Replacement
.
- Remove the rear compartment lid wiring harness from the rear compartment
lid. Refer to
Rear Compartment Lid Wiring Harness Replacement
.
Notice: When removing body panels, apply tape to corners of panel and adjacent
surfaces to help prevent paint damage.
- With the aid of an assistant, remove the fasteners (3) securing the
rear compartment lid (1) to the rear compartment lid hinge (2).
- Remove the rear compartment lid (1) from the vehicle.
- Remove the backup lamp. Refer to
Backup Lamp Replacement
in Lighting Systems.
- Remove the high mounted stop lamp. Refer to
High Mount Stop Lamp Replacement
.
- Remove the rear compartment lid latch. Refer to
Rear Compartment Lid Latch Replacement
.
- Remove the rear compartment lid lock cylinder. Refer to
Rear Compartment Lid Lock Cylinder Replacement
.
- Remove the rear compartment lid overslam bumpers (2) from the
rear compartment lid (1).
- Remove the rear compartment
lid drain plugs (1, 2, 3) from the rear compartment lid.
Installation Procedure
- Install the rear compartment
lid drain plugs (1, 2, 3) into the rear compartment lid.
- Install the rear compartment lid overslam bumpers (2) to the
rear compartment lid (1).
- Install the rear compartment lid lock cylinder. Refer to
Rear Compartment Lid Lock Cylinder Replacement
.
- Install the rear compartment lid latch. Refer to
Rear Compartment Lid Latch Replacement
.
- Install the high mounted stop lamp. Refer to
High Mount Stop Lamp Replacement
.
- Install the backup lamp. Refer to
Backup Lamp Replacement
in Lighting Systems.
- With the aid of an assistant,
install the rear compartment lid (1) to the vehicle.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- With the aid of
an assistant, install the fasteners (3) in order to secure the rear
compartment lid (1) to the rear compartment lid hinge (2).
Tighten
Tighten the fasteners to 25 N·m (18 lb ft).
- Adjust rear compartment lid as necessary. Refer to
Rear Compartment Lid Adjustment
.
- Install the rear compartment lid wiring harness from the rear
compartment lid. Refer to
Rear Compartment Lid Wiring Harness Replacement
.
- Install the rear compartment lid trim panel. Refer to
Rear Compartment Lid Inner Panel Trim Replacement
.
- Close the rear compartment lid.