GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 DeVille 🢒 Body 🢒 Bumpers 🢒 Front License Plate Mount Trim Cover Replacement

Removal Procedure

    Object Number: 130551 Size: SH
  1. Remove the bolts (3) that secure the front license pocket cover (1) to the front bumper fascia (2).

    2. Object Number: 585204 Size: SH
  2. Pull the bottom of the front license pocket cover (1) outward and down to disengage the tabs (2) at the top of the cover.
  3. Remove the front license pocket cover (1) from the fascia (3).

Installation Procedure

    Object Number: 585204 Size: SH
  1. Position the front license pocket cover (1) to the fascia (3).
  2. Position the tabs (2) on the front license pocket cover  (1) into the slots in the fascia (3).
  3. Push the bottom of the front license pocket cover (1) into the fascia (3).

    4. Object Number: 130551 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the bolts (3) in order to retain the front license pocket cover (1) to the fascia (2).

    5. Tighten
    Tighten the bolts to 2 N·m (18 lb in).