Modes of Operation
Automatic Door Locks
The following are the modes of operation for the automatic door locks feature:
| The automatic door locks feature is disabled. |
| All of the doors lock when the vehicle is shifted out of PARK with the ignition
ON. |
| All of the doors lock when the vehicle is shifted out of PARK with the ignition
ON. Only the driver door unlocks when the vehicle is shifted into PARK. |
| All of the doors lock when the vehicle is shifted out of PARK with the ignition
ON. All of the doors unlock when the vehicle is shifted into PARK. |
| All of the doors lock when the vehicle is shifted out of PARK with the ignition
ON. Only the drivers door unlocks when the ignition is turned OFF with the vehicle
in PARK. |
| All of the doors lock when the vehicle is shifted out of PARK with the ignition
ON. All of the doors unlock when the ignition is turned OFF with the vehicle in
PARK. |
Remote Activation Verification
The following are the modes of operation for the remote activation verification
feature:
| The remote activation verification feature is disabled. |
| The exterior lamps flash on a remote UNLOCK command. |
| The exterior lamps flash on a remote LOCK command. |
| The exterior lamps flash once on a remote LOCK command, and they flash multiple
times on a remote UNLOCK command. |
| The exterior lamps flash once on a remote LOCK command. |
| The exterior lamps and the interior lamps flash once on a remote LOCK command.
The exterior lamps and the interior lamps flash multiple times on a remote
UNLOCK command. |
Memory Seats, Memory Steering Column and Memory Mirrors Programming
Perform the following actions in order to program the memory seats, the memory
steering column, and the memory mirrors:
- Move the seat, the steering column, and the sideview mirrors to the desired
position.
- Press the SET button.
- Press the 1 button or the 2 button, depending on the driver. A chime
will sound to indicate that the setting has been saved.
- Repeat the steps for the second driver.
- Move the seat , the steering column, and the sideview mirrors to the
desired exit position.
- Press the SET button.
- Press the EXIT button.
- Press the 1 button or the 2 button, depending on the driver. A chime
will sound to indicate that the setting has been saved.
- Repeat the steps for the second driver.
Programming Features with the Driver Information Center (DIC)
Enter Programming
To enter programming with the DIC, perform the following actions:
- Turn the ignition to RUN.
- Place the vehicle in PARK.
- Press the MEMORY seat button 1 or 2 depending on the driver for this
session of personalization programming.
- Press the INFO button on the DIC until the DIC displays FEATURE PROGRAMMING.
- Press the ON/OFF button to enter the programming mode.
- The DIC displays Driver #1 or Driver #2 depending on the chosen driver
for this session of personalization programming.
- Press the INFO button up or down to scroll through the feature choices.
Memory Seats, Memory Mirrors, and Memory Steering Column
Continue with the following steps in order to personalize the memory recall:
- Use the ON/OFF button to turn one of the following options ON or OFF--Only
one choice can be ON at any given time:
- Press the INFO button in order to advance to the next feature.
- The DIC displays AUTO EXIT SEAT.
- Press the ON/OFF button in order to turn this feature ON or OFF.
- Press the INFO button in order to advance to the next feature.
- The DIC displays AUTO EXIT STRG WHEEL.
- Press the ON/OFF button in order to turn this feature ON or OFF.
- Press the INFO button in order to advance to the next feature.
Remote Activation Verification
Continue with the following steps in order to personalize the remote activation
verification feature:
- The DIC displays LIGHTS FLASH AT UNLOCK.
- Press the ON/OFF button in order to turn this feature ON or OFF.
- Press the INFO button in order to advance to the next option.
- The DIC displays LIGHTS FLASH AT LOCK.
- Press the ON/OFF button in order to turn this feature ON or OFF.
- Press the INFO button in order to advance to the next option.
- The DIC displays HORN SOUNDS AT LOCK.
- Press the ON/OFF button in order to turn this feature ON or OFF.
- Press the INFO button in order to advance to the next option.
- The DIC displays EXT LIGHTS AT UNLOCK.
- Press the ON/OFF button in order to turn this feature ON or OFF.
- Press the INFO button in order to advance to the next option.
Automatic Door Locks
Continue with the following steps in order to personalize the automatic door
locks:
- The DIC displays DOORS LOCK IN GEAR.
- Press the ON/OFF button in order to turn this feature ON or OFF.
- Press the INFO button in order to advance to the next option.
- Use the ON/OFF button in order to turn one of the following features
On or OFF--only one choice can be On at any given time:
• | DRIVER UNLOCK AT KEY OFF |
• | DOORS UNLOCK AT KEY OFF |
- Press the INFO button in order to advance to the next option.
Parallel Park Assist
Continue with the following steps in order to personalize the parallel park
assist feature:
- The DIC displays MIRROR TO CURB IN REVERSE.
- Press the ON/OFF button in order to turn this feature ON or OFF.
- Press the INFO button in order to advance to the next option.
Programming Features with the Tech 2
Enter Programming
To enter programming with the Tech 2 , perform the following actions:
- Install the scan tool.
- Turn ON the ignition with the engine OFF.
- Select the correct vehicle and model year.
- Select Body.
- Select Personalization.
Automatic Door Locks
Continue with the following steps in order to program the automatic door locks:
- Select Set Options.
- Select Driver #1 Automatic Door Lock Mode or Driver #2 Automatic Door
Lock Mode.
- Highlight the desired mode from the following choices--refer to
Automatic Door Locks modes for mode descriptions:
- Exit from the menu.
Driver ID:
Continue with the following steps in order to enter a new driver ID:
- Select Driver Information Center.
- Select Driver #1 or Driver #2.
- Select Driver #1 Name or Driver #2 Name, depending on your previous choice.
- The Tech 2 tool displays directions for entering the Driver's Name. Read
and press Enter.
- Spell the Drivers name by highlighting the correct character and pressing
enter.
- Repeat until the drivers name is spelled correctly.
- Exit from the menu.
Parallel Park Assist
Continue with the following steps in order to program the parallel park assist
feature:
- Select Set Options
- Select Driver #1 Curb View or Driver #2 Curb View.
- Highlight Parallel Park Assist and press the ENTER button to turn the
feature ON or OFF. An asterisk appears when the feature is turned ON.
- Exit from the menu.
Perimeter Lighting
Continue with the following steps in order to program the perimeter lighting
feature:
- Select Set Options.
- Select Driver #1 Perimeter Lighting, Driver #2 Perimeter Lighting or
Driver #3 & Driver #4 Perimeter Lighting.
- Highlight Perimeter Lighting and press the ENTER button to turn the feature
ON or OFF. An asterisk appears when the feature is turned ON.
- Exit from the menu.
Remote Activation Verification
Continue with the following steps in order to program the remote activation
verification feature:
- Select Set Options.
- Select Driver #1 Activation Verification or Driver #2 Activation Verification.
- Highlight the desired mode from the following choices--Refer to Remote
Activation Verification modes for mode descriptions:
- Press the ENTER button to turn the mode ON or OFF. An asterisk appears
beside the current mode. You must turn the current mode OFF before you can turn
another one ON.
- Exit from the menu.
Additional Information
For more information on the personalization features, refer to one of the following
description and operations: