GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 DeVille 🢒 Body 🢒 Lighting Systems 🢒 Front Fog Lamp Replacement

Removal Procedure

    Object Number: 455628 Size: SH
  1. Remove the exterior fastener that secures the fog lamp to the front fascia.
  2. Remove the front air deflector. Refer to Front Air Deflector Replacement in Body Front End.

    3. Object Number: 459833 Size: SH
  3. Disconnect the electrical connector from the fog lamp.

    4. Object Number: 455636 Size: SH
  4. Remove the remaining fasteners securing the fog lamp to the fascia.
  5. Remove the fog lamp assembly.

Installation Procedure

    Object Number: 455636 Size: SH
  1. Insert the locating pin into the front fascia.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the inboard fasteners in order to secure the fog lamp to the front fascia.

    3. Tighten
    Tighten the fog lamp fasteners to 2 N·m (18 lb in).


    Object Number: 459833 Size: SH
  3. Connect the fog lamp connector to the fog lamp.

    4. Object Number: 455628 Size: SH
  4. Install the remaining fog lamp fastener located on the exterior of the front fascia.

    5. Tighten
    Tighten the fog lamp fastener to 2 N·m (18 lb in).

  5. Install the front air deflector. Refer to Front Air Deflector Replacement in Body Front End.