Rear Seat Head Restraint Replacement DHS
Removal Procedure
- Remove the rear seat back. Refer to
Rear Seat Back Replacement
.
- Fully extend the head restraint.
- Remove the seat back cushion cover J channel, below the head restraint
being serviced.
- Pull up on the seat back cover (2) in order to access the
rear seat head restraint release buttons (1).
- Push in on the head restraint release
buttons and remove the rear head restraint (1) from the seat back (2).
Installation Procedure
- Install the seat back J channels (2)
to the seat back frame.
- Install the rear seat back. Refer to
Rear Seat Back Replacement
.
- Align the head restraint (1)
with the seat back.
- Push the head restraint downward into the seat back in order to
engage the head restraint into the retainers (2).
- Check for proper operation of the head restraint.