GM Service Manual Online
For 1990-2009 cars only

Rear Seat Cushion Cover and Pad Replacement Draw String

Removal Procedure


    Object Number: 731396  Size: SH
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement .
  2. Unhook the rear seat cover draw strings (1) from the seat bottom frame (2).
  3. Loosen the rear seat cover draw strings (1)

  4. Object Number: 502274  Size: SH
  5. Remove the seat cushion cover (1) and the seat foam (2) from the rear seat bottom frame.
  6. Cut the hog rings which retain the seat cover (1) to the foam pad ditches.

Installation Procedure


    Object Number: 502274  Size: SH
  1. Position the seat cushion cover (1) over the seat cushion foam pad.
  2. Install the hog rings in order to hold the rear seat cushion cover to the foam pad, in the ditches on the foam pad.
  3. Install the seat cushion (2) to the seat cushion frame.
  4. Work the seat cushion cover (1) over the cushion.

  5. Object Number: 731396  Size: SH
  6. After the rear seat cover is installed to the seat frame, tighten the draw strings (1) in order to retain the seat cover and the cushion to the rear seat bottom frame (2).
  7. Ensure the rear seat cover is securely fastened, then hook the draw string (1) ends to the rear seat bottom frame (2).
  8. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .