GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the rear seat back. Refer to Rear Seat Back Replacement .

  2. Object Number: 493780  Size: SH
  3. Remove the seat back clip fastener (2)

  4. Object Number: 493776  Size: SH
  5. Remove the rear seat back clip (1) from the seat back.

Installation Procedure


    Object Number: 493776  Size: SH
  1. Install the seat back clip (1) to the seat back.

  2. Object Number: 493780  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the seat back clip fastener (2).
  4. Tighten
    Tighten the seat back clip fastener to 1.5 N·m (13 lb in).

  5. Install the rear seat back. Rear Seat Back Replacement .