Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Driver Seat Schematics , Passenger Seat Schematics , or Rear Seat Schematics | |||
1 | Did you review the heated seat operation and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Seats |
2 | Verify that the Heated Seat Switch High Indicator Malfunction complaint is present. Does the high temperature indicator of the heated seat switch operate as described in the Heated Seats Description and Operation? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Turn ON the ignition, with the engine OFF. Is the HI temperature indicator always ON? | Go to Step 7 | Go to Step 4 |
4 |
Does the HI temperature indicator illuminate? | Go to Step 5 | Go to Step 9 |
5 | Test the heated seat high temperature indicator control circuit between the heated seat switch and the door module for a short to battery voltage, a high resistance, or an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 12 | Go to Step 6 |
6 | Test the heated seat back only mode indicator control circuit between the heated seat switch and the door module for a short to voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 12 | Go to Step 8 |
7 | Test the heated seat high temperature indicator control circuit between the heated seat switch and the door module for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 12 | Go to Step 8 |
8 | Inspect for poor connections at the harness connector of the door control module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 12 | Go to Step 10 |
9 | Inspect for poor connections at the harness connector of the heated seat switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 12 | Go to Step 11 |
10 | Replace the door control module. Refer to Control Module References in Computer/Integrating Systems for replacement, setup, and programming. Did you complete the replacement? | Go to Step 12 | -- |
11 | Replace the heated seat switch. Refer to Rear Seat Heater Switch Replacement . Did you complete the replacement? | Go to Step 12 | -- |
12 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
