Windshield Pillar Garnish Molding Replacement Standard

1. Pull the windshield pillar garnish molding away from the windshield pillar to disengage the retainer clips.
2. Remove the windshield pillar garnish molding.

1. Position the lower the end of the windshield pillar garnish molding behind instrument panel cover.
2. Align the clips to the holes in the windshield pillar.
3. Push in on the windshield pillar garnish molding to engage the retainer clips.

Windshield Pillar Garnish Molding Replacement WC2, WC8

1. Remove the front door weatherstrip. Refer to Front Door Opening Weatherstrip Replacement in Doors.
2. Pull the outside edge of the trim (1) away from the armor plating (2).
3. Rotate the trim towards the windshield in order to release the retaining edge of the trim.

1. Install the windshield side of the trim.
2. Rotate the trim (1) towards the door opening until the trim snaps into the armor plating (2).
3. Install the front door weatherstrip. Refer to Front Door Opening Weatherstrip Replacement in Doors.