Television Antenna Module Replacement UE7

1. Remove the passenger side sail panel. Refer to Sail Panel Replacement .



2. Disconnect the electrical wiring and coaxial cables (1, 4, 5) from the TV antenna module (3).
3. Remove the TV antenna module fasteners (2).
4. Remove the TV antenna module (3) from the vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.




1. Install the TV antenna module (3) and fasteners (2).

Tighten
Tighten the TV antenna module (3) fasteners (2) to 9 N·m (80 lb in).

2. Connect the electrical wiring and coaxial cables (1, 4, 5) to the TV antenna module (3).
3. Install the passenger side sail panel. Refer to Sail Panel Replacement .