GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 DeVille 🢒 Body 🢒 Wipers/Washer Systems 🢒 Windshield Washer Solvent Container Replacement

Removal Procedure

    Object Number: 497483 Size: SH
  1. Remove the right front fascia extension. Refer to Front Bumper Fascia Extension Replacement in Bumpers.
  2. Disconnect the washer hose from the washer pump.
  3. Disconnect the electrical connector from the washer pump.
  4. Disconnect the electrical connector from the washer solvent level sensor.

    5. Object Number: 497486 Size: SH
  5. Remove the 3 nuts from the washer solvent container.
  6. Remove the washer solvent container from the vehicle.

    7. Object Number: 497487 Size: SH
  7. Remove the washer pump from the washer solvent container.

Installation Procedure

    Object Number: 497487 Size: SH
  1. Install the washer pump in the washer solvent container.

    2. Object Number: 497486 Size: SH
  2. Install the washer solvent container on the vehicle.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the 3 nuts.

    4. Tighten
    Tighten the 3 nuts to 6 N·m (53 lb in).


    Object Number: 497483 Size: SH
  4. Connect the electrical connector to the washer solvent level sensor.
  5. Connect the electrical connector to the washer pump.
  6. Connect the washer hose to the washer pump.
  7. Install the right front fascia extension. Refer to Front Bumper Fascia Extension Replacement in Bumpers.