Removal Procedure
Notice: Be sure to follow the service procedure when removing the air inlet
grille panel. Failure to follow service procedure may cause damage to the
air inlet grille panel or the windshield.
- Open the hood.
- Remove the windshield wiper arms. Refer to
Windshield Wiper Arm Replacement
.
- Remove the hood seal, rear. Refer to
Hood Rear Seal Replacement
.
- Remove the push in retainers (2) securing the air inlet grill panels (1) to the vehicle.
- Disconnect the washer hose connector.
- Push the washer hose grommet into the plenum area.
- Remove the air inlet grille panel from the vehicle.
Installation Procedure
- Position the washer hose and the washer hose grommet through the hole in the plenum area.
- Press the washer hose grommet into position and ensure that it is fully seated.
- Install the air inlet grille panels (1) to the vehicle.
- Connect the washer hose connector.
- Install the push in retainers (2) in order to secure the air inlet grille panel (1) to the body.
- Install the windshield wiper arms. Refer to
Windshield Wiper Arm Replacement
.
- Close the hood.