Removal Procedure
- Insert your fingers between the headliner
and the information center telltale assembly bezel. Gently pull down to release
the display bezel.
- Use a screwdriver to release the locking
tab at the rear of the telltale assembly.
- Tilt the display down. Pull down to remove.
- Disconnect the electrical connector.
Installation Procedure
- Connect the electrical connector
to the information center telltale assembly.
- Insert the display into the headliner until the locking tab locks into
position. The display may need to be rocked into position.
- Install bezel by pushing it up until the tabs lock into position.