Disc Brake Component Specifications. Cadillac DeVille 2005

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2005 🢒 DeVille 🢒 Brakes 🢒 Disc Brakes 🢒 Disc Brake Component Specifications

Caution: Two different designs of the front brake rotors and front brake pads are used on this vehicle. Do NOT interchange first design and second design parts, or a loss of braking and personal injury could occur.

Application	Specification
Application	Metric	English
Front Brake Pads
Taper	0.15 mm	0.006 in
Front Brake Rotors
Rotor Diameter, First Design Before VIN 5U129029	303.0 mm	11.90 in
Rotor Diameter, Second Design After VIN 5U129029	303.0 mm	11.90 in
Rotor Diameter (J55)	330.0 mm	12.99 in
Rotor Discard Thickness*, First Design Before VIN 5U129029	30.70 mm	1.209 in
Rotor Discard Thickness*, Second Design After VIN 5U129029	28.50 mm	1.122 in
Rotor Discard Thickness (J55)*	36.0 mm	1.417 in
Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Assembled Lateral Runout (J55)	0.05 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rotor Maximum Allowable Thickness Variation (J55)	0.025 mm	0.001 in
Rotor Minimum Allowable Thickness after Refinishing, First Design Before VIN 5U129029	31.08 mm	1.224 in
Rotor Minimum Allowable Thickness after Refinishing, Second Design After VIN 5U129029	28.66 mm	1.125 in
Rotor Minimum Allowable Thickness after Refinishing (J55)	37.0 mm	1.457 in
Rotor Thickness (New), First Design Before VIN 5U129029	32.20 mm	1.267 in
Rotor Thickness (New), Second Design After VIN 5U129029	30.0 mm	1.181 in
Rotor Thickness (New, J55)	38.0 mm	1.496 in
Rear Brake Pads
Taper	0.15 mm	0.006 in
Rear Brake Rotors
Rotor Diameter	297.0 mm	11.70 in
Rotor Diameter (J55)	325.0 mm	12.79 in
Rotor Discard Thickness*	9.00 mm	0.354 in
Rotor Discard Thickness (J55)*	18.50 mm	0.728 in
Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Assembled Lateral Runout (J55)	0.05 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rotor Maximum Allowable Thickness Variation (J55)	0.025 mm	0.001 in
Rotor Minimum Allowable Thickness after Refinishing	10.25 mm	0.404 in
Rotor Minimum Allowable Thickness after Refinishing (J55)	19.0 mm	0.748 in
Rotor Thickness (New)	11.0 mm	0.433 in
Rotor Thickness (New, J55)	20.0 mm	0.787 in
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specification.