Wiring Harness Replacement - Inflatable Restraint - Passenger Seat V4U, APL
Removal Procedure
Caution: Refer to SIR Caution in the Preface section.
- Pull back the carpet on the right side of
the console in order to access the wiring harness.
- Pull the harness from under the carpet.
- Remove the connector position assurance (CPA) from the electrical connector.
- Disconnect the electrical connector (1).
- Remove the passenger seat inflatable restraint harness assembly (2).
Installation Procedure
- Install the Passenger seat inflatable restraint
harness assembly (2).
- Connect the electrical connector (1).
- Install the CPA to the electrical connector.
- Tuck the harness behind the carpet on the right side of the console.
- Reposition the carpet.